+86-15832151814

Home>> News>>

Stainless Steel Rope Mesh Ferrule Type

This type of stainless steel rope mesh is made by securing a ferrule at every joint of the aperture. The wire rope construction is normally 7 x 7 or 7 x 19. The standard mesh angle is 60°. Aperture is normally bigger than the Weave Type ranging from 40mmx70mm to 150mmx250mm. The mesh construction can be pulled apart like an accordion, with a spring force that varies depending on the mesh aperture size and angle and the wire diameter. The Ferrule Type meshes are commonly use for decorative purpose in architecture design. It can also be applied to any other relevant applications.
1.Free Sample: 
Sample in the size of less than 1 meter square could be provided free of charge but the courier charges would need to be borne by the requestor.
2. Custom Specification 
     a. Panel Size: Our standard size is 10 meter x 10 meter. However we could produce rope mesh according to buyer requirements.
     b. Wire Rope Diameter: Our wire rope diameters are ranging from 1.2mm, 1.6mm, 2.0mm, 2.4 mm, and 3.2mm.
     c. Apertures: Our standard apertures are from 120mm x 120mm, 102mm x 102mm, 90mm x 90mm, 76mm x 76mm, 60mm x 60mm, 51mm x 51mm, 38mm x 38mm, 25mm x 25mm, 20mm x 20mm. For more information, please visit our Product page.
If there are any other special requirements of apertures out of the above, please do not hesitate to contact us.
3. The size of Bulk Roll 
The size of the bulk roll can varies depending on the size of the rope mesh you ordered.
4. Packaging 
The rope mesh will be rolled and packed into the P.P. woven bags or wooden crates
5. Lead time
Order could be arranged within 24hours, lead time can be 7-30 days depending on the size of your order.
Please do not hesitate to contact our sales personnel for any requirement.
Stainless Steel Rope Mesh Ferrule Type

Stainless Steel Rope Mesh Ferrule Type


Copyright Anping Yuntong Metal Mesh Co.,Ltd.All rights Reserved.
收缩

Online Services